Getting Started
Default solution folder, feel free to edit or delete it.
This procedure details how to connect your zim to a wifi network.
if you aren't able to complete this procedure, we have outlined some of the most fr...
Wed, 29 Apr, 2015 at 10:50 AM
The leveling of the printing plate has been calibrated at the factory and should not have to be modified until you change the nozzles, the printing plate or...
Mon, 16 Feb, 2015 at 8:27 PM
1. Go to your zim software homepage
2. Click on the “About” Tab.
3. In this section you will find ...
Mon, 16 Feb, 2015 at 8:27 PM
In order to reset zim network parameters, zim needs to be switched on for at least two minutes.
With a paper clip (or print the attached reset butto...
Mon, 26 Jan, 2015 at 6:24 AM
To Insert / Remove your cartridges, please follow the steps bellow :
I. Insert your Cartridge
1. Insert the cartridge as indicate...
Sat, 13 Dec, 2014 at 12:23 PM
This procedure details how to connect your zim to an ethernet network.
Requirements :
The initial setting up of zim requires a PC with Wi-Fi conn...
Tue, 27 Jan, 2015 at 5:09 PM
This procedure is intended for users who :
1. can connect to zim on their local network (using either an IP address or http://zim/
2. can't connec...
Mon, 26 Jan, 2015 at 4:53 PM